It’s been a pretty good week. The WebGl graphics in the directive are connected to the user functionality in the controller, I have tooltips running, and even have raycasting working, so the 2D items appear in the overlay plane above the 3D object:

 

The big problem that I needed to chase down was circular references in the typescript files. TypeScript uses reference path comments to tell the compiler where to look for type and structure information. Below is the information that I need for the angular module that creates the above application

/// <reference path="../../definitelytyped/angularjs/angular.d.ts" />
/// <reference path="../controllers/WGLA1_controller.d.ts" />
/// <reference path="../directives/WGLA2_directives.d.ts" />

In this case note that there is a path for controller and directive code. In this case, pointing directly to the code file is fine, but I have a case where my WebGLCanvas has to know about WebGLComponents and vice versa. The typescript compiler (tsc) doesn’t like that, and barfs a ‘duplicate definition’ error. At this point, I was wondering why TypeScript doesn’t have a #pragma once directive that would prevent this sort of thing, or even an #ifndef capability. It’s a preprocessor after all, and it should be able to do this. Easily.

But TypeScript does have interfaces. So in this case, I put interfaces for both modules in a single file, which I could then refer to in the downstream files and avoid the circular dependency issue.

The other issue was browsers not playing well together. I kind of thought that we had gotten beyond that, but no.

I develop with IntelliJ, and their debugger plays the best with Chrome, so that’s my default browser. At the end of the day, I’ll check to see that everything runs in IE and FF. And today FF was not playing well, and the tooltips I worked so hard on were not showing. WTF, I say.

If you look at the screenshot above, you’ll see the white text at the upper left. That’s my real-time logging (it’s pointless to write to the console at 30hz). And I could see that the unit mouse values were NaN. Again, WTF.

Now FF has my favorite debugger, and it even works (generally) with typescript, as long as you have all the .ts and .map files alongside your .js files. So I stepped into the code at the handleMouseEvents() method in WebGlCanvasClasses and started looking.

I’ve been getting the mouse coordinate from MouseEvent.offsetX. That turns out be used by IE and Chrome, but not FF. so I changed

var sx:number = ev.offsetX; to var sx:number = ev.offsetX | ev.layerX;

All fixed, I thought. But wait! There’s more! It turns out that IE has both of these values, and they don’t mean the same thing. so in the end I wind up with the following monkeypatch:

handleMouseEvents = (ev:MouseEvent):void => {
    var sx = ev.layerX;
    var sy = ev.layerY;

    if(ev.offsetX < sx){
        sx = ev.offsetX;
        sy = ev.offsetY;
    }
}

This works because the smaller value has to be the coordinate of the mouse on the div I’m interested, since all screen coordinates increase from 0. So it’s quick, but jeez.

This is not my first foray into WebGL. The last time I was working on a 3D charting API using the YUI framework, which could do things like this:

Personally, I can’t do any debugging at 30fps without having a live list of debugging text that I can watch. So almost immediately after the ‘hello world’ spinning cube, I set that up. And now I’m in the middle of moving my framework over to Angular and TypeScript. For the most part, I like how things are working out, but when it comes to lining up a transparent text plane over a threeJS element, YUI gives a lot more support than Angular. The following is so brute-force that I feel like I must be doing it wrong (And there may be a jquery-lite pattern, but after trying a few StackOverflow suggestions that didn’t work), I went with the following.

First, this all happens in the directive. I try to keep that pretty clean:

// The webGL directive. Instantiates a webGlBase-derived class for each scope
export class ngWebgl {
   private myDirective:ng.IDirective;

   constructor() {
      this.myDirective = null;
   }

   private linkFn = (scope:any, element:any, attrs:any) => {
      //var rb:WebGLBaseClasses.RootBase = new WebGLBaseClasses.RootBase(scope, element, attrs);
      var rb:WebGlRoot = new WebGlRoot(scope, element, attrs);
      scope.webGlBase = rb;
      var initObj:any = {
         showStage: true
      };
      rb.initializer(initObj);
      rb.animate();
   };

   public ctor = ():ng.IDirective => {
      if (!this.myDirective) {
         this.myDirective = {
            restrict: 'AE',
            scope: {
               'width': '=',
               'height': '=',
            },
            link: this.linkFn
         }
      }
      return this.myDirective;
   }
}

The interface with all the webGL code happens in the linkFn() method. Note that the WebGLRoot class gets assigned to the scope. This allows for multiple canvases.

WebGLRoot is a class that inherits from WebGLBaseClasses.CanvasBase, which is one of the two big classes I’m currently working on. It’s mostly there to make sure that everything inherits correctly and I don’t break that without noticing:-)

Within WebGLBaseClasses.CanvasBase is the initializer() method. That in turn calls the methods that set up the WebGL and the ‘stage’ that I want to interact with. The part we’re interested for our overlay plane is the overlay canvas’ context. You’ll needthat  to draw into later:

overlayContext:CanvasRenderingContext2D;

This is set up along with the renderer. Interesting bits are in bold:

this.renderer = new THREE.WebGLRenderer({antialias: true});
this.renderer.setClearColor(this.blackColor, 1);
this.renderer.setSize(this.contW, this.contH);

// element is provided by the angular directive
this.renderer.domElement.setAttribute("class", "glContainer");
this.myElements[0].appendChild(this.renderer.domElement);

var overlayElement:HTMLCanvasElement = document.createElement("canvas");
overlayElement.setAttribute("class", "overlayContainer");
this.myElements[0].appendChild(overlayElement);
this.overlayContext = this.overlayElement.getContext("2d");

The first thing to notice is that I have to add CSS classes to the elements. These are pretty simple, just setting absolute and Z-index:

.glContainer {
    position: absolute;
    z-index: 0;
}

.overlayContainer {
    position: absolute;
    z-index: 1;
}

That forces everything to have the same upper left corner. And once that problem was solved, drawing is pretty straightforward. The way I have things set up is with an animate method that uses requestAnimationFrame() wich then calls the render() method. That draws the 3D, and then hands the 2D context off to the draw2D() method:

draw2D = (ctx:CanvasRenderingContext2D):void =>{
   var canvas:HTMLCanvasElement = ctx.canvas;
   canvas.width = this.contW;
   canvas.height = this.contH;
   ctx.clearRect(0, 0, canvas.width, canvas.height);
   ctx.font = '12px "Times New Roman"';
   ctx.fillStyle = 'rgba( 255, 255, 255, 1)'; // Set the letter color
   ctx.fillText("Hello, framecount: "+this.frameCount, 10, 20);
};

render = ():void => {
   // do the 3D rendering
   this.camera.lookAt(this.scene.position);
   this.renderer.render(this.scene, this.camera);
   this.frameCount++;

   this.draw2D(this.overlayContext);
};

I’m supplying links to to the running code and directives, but please bear in mind that this is in-process development and not an minimal application for clarity.

• WebGLAngularTest1.html
• WGLA1_directives.ts
• WGLA1_controller.ts
• AppMain.ts